You Can Spray Paint Your Bathroom Fixtures- Believe It or Not!

The worn-out showerheads, faucets, or taps, never look good especially when they clash with your freshly updated bathroom. But we also get that changing everything is not so budget-friendly, so what’s the solution? 

Well, you can spray-paint your bathroom fixtures!!

We’ve got all the tips and tricks you need to successfully spray paint your bathroom fixtures. From choosing the right type of spray paint to prepping the surfaces and applying the paint, we’ll walk you through each step.

Not only will you save money, but you’ll also give your bathroom a whole new vibe without the stress and expense of replacing everything. 

So grab your spray paint and let’s dive in! 

Key Takeaways: Spray Painting Bathroom Fixtures:

Yes, You Can Spray Paint Bathroom Fixtures Spray painting is a budget-friendly way to update your bathroom fixtures. Here’s the short version: clean and sand the fixtures, use primer, tape off the surrounding areas, and then spray on even coats. Keep your hand moving steadily to avoid drips, and don’t forget to let it dry completely.

Is It Safe to Spray Paint Bathroom Fixtures?

First, let’s discuss the safety part. It’s completely safe to spray paint the bathroom fixtures. 

Although the fixtures won’t look completely new, they can easily give your bathroom a clean and updated look. However, there are a few important considerations for this clean to last long and have the right texture. 

For instance, the type of spray paint you’re using, the material of the fixtures, and also the way you apply the spray paint coat. Everything matter! Meaning if you’re after perfection, you need to follow every step mentioned below. 

What You Need to Spray Paint Bathroom Fixtures 

Remember you need all the items listed below—no shortcuts. It’s all or nothing if you want a professional-looking finish.

1. Fine grit steel wool/sandpaper: Fine grit sandpaper or steel wool you can pick any one among them. Both of them will work right! 
2. Painter tape: It will help you protect the area around the fixtures. 
3. Plastic drop cloth: Plastic drop cloth can save the bathroom floor and furniture from spray paint. 
4. Primer: Primer will help you prepare the surface of the fixtures. 
5. Respirator mask and gloves: The respirator mask keeps you from breathing in fumes, and gloves protect your hands from getting covered in paint.
6. Spray Paint: Last but most importantly you need a spray paint that’s designed for the metal of fixtures. 

4 Tips to Select the Best Spray Paints for Bathroom Fixtures:

Make sure the spray paint is designed for your specific fixture type. Some paints work on metal but not on wood, while others suit multiple surfaces. The type of finish you want is also important when choosing spray paint. If you prefer a matte look over glossy, choose a spray paint that delivers a matte texture. For bathrooms, find spray paints that are washable and moisture-resistant; otherwise, the paint could start chipping in a few months. Invest in high-quality spray paint to ensure it stands up to daily wear and tear. A cheaper option might save you money now, but it could cost you more later if you need to redo the job. We suggest you choose a matte color for spray paint over shiny options. Glossy paints tend to highlight surface imperfections, even if the surface is prepped well.

5 Simple Steps Guide to Spray Paint Bathroom Fixtures

Now let’s jump into the main part of spray painting the bathroom fixtures. 

Step 1: Give It a Deep Clean

The biggest mistake people make when spray painting bathroom fixtures is skipping the cleaning step. 

Don’t be that person who sprays paint over dirt and then wonders why it looks terrible. A dirty surface won’t hold paint, and you’ll end up with a patchy, peeling mess.

So, grab a good cleaning solution and a scrubbing brush, and really get in there. You want to remove any grime, soap scum, or other gunk that’s built up over time. 

Take your time and clean every nook and cranny. 

Step 2: Prep for Fixtures

Now that you’ve given your fixtures a good cleaning, it’s time to prep them for painting. This step is crucial for making sure the paint sticks well and lasts longer.

Grab some fine-grit sandpaper or fine steel wool. Start scrubbing the surface of your fixtures, applying enough pressure to remove any rust or stubborn grime. 

Create a slightly rough texture for the paint to grip onto, but don’t go overboard—you just need to take off the top layer of old paint, rust, or anything else that might interfere with a smooth finish.

Once you’ve scrubbed thoroughly, rinse the fixtures with clean water to wash away all the sanding dust. Dry them off completely with a soft cloth or towel. If there’s any moisture left, the paint might not adhere properly, so make sure they’re bone dry then apply a coat of primer. 

Step 3: Cover Surrounding Area

Next up is to make sure you don’t accidentally turn your bathroom into a spray paint art project. 

To keep paint where it belongs, cover the surrounding area with painter’s tape and drop cloths. Start by using painter’s tape around the fixture you’re about to spray. 

After that, lay down drop cloths to protect the surrounding area. Cut a hole in the drop cloth where the fixture is, then tape the cloth securely to the taped area around the fixture. 

This way you’ll have a double barrier against the spray paint. If the paint leaks through the first layer of tape, the second layer, plus the drop cloth, will keep your walls and floor safe from accidental splatters.

Step 4: Start Spraying

You’re ready to spray, but before you start, grab the can and give it a good shake. Shake it for at least 60 seconds to make sure the paint is thoroughly mixed. 

If you’re new to spray painting, do a practice round on a piece of cardboard first. Hold the can about 15 to 18 inches away and practice spraying in a steady back-and-forth motion. This helps you get a feel for the can and the ideal distance to hold it from the surface.

Maintain steady back-and-forth motion of hand while spray painting, and make sure you cover the entire surface. Since bathroom fixtures can be round or have multiple angles, move your hand in a 360-degree motion to reach all sides evenly.

Be careful not to stay in one spot too long—that’s a quick way to get drips or uneven layers. 

Our Recommendation for Spray Paint – Rust-Oleum 331185 Painter’s Touch Spray Paint

Why we choose it:  Designed for multipurpose (wood, metal, plastic, wicker) Provides ultra-matte finish (no minor imperfection would be seen) Suitable for Indoor and outdoor use.  Ensure long-lasting protection

Step 5: Let It Dry 

Last but not least, let the spray paint dry. The time it takes depends on the material of the fixtures. You may have to wait an hour or a few hours, but make sure not to touch the fixtures until they’re dry.  

Once everything is dry and set, you can reassemble any parts you removed and enjoy your freshly painted bathroom fixtures. 

Does spray painting bathroom fixtures last? 

Spray painting bathroom fixtures can last for several years, but it depends on how well you prepare and apply the paint. 

If you follow the right steps, you’ll have a durable finish. If you cut corners, well, you could end up with a peeling mess. 

So, to ensure your spray-painted fixtures stand the test of time, make sure to follow each step mentioned above and use good quality spray paint. 

Final Thoughts

Congratulations, YOU DID IT!! 

You’ve found the answers to can you spray paint bathroom fixtures along with a way to give your old faucets, showerheads, and taps a whole new look. 

Now step back, admire your handiwork, and start planning your next DIY project. Let us know in the comments section if you’ve any other questions for us.